Modular Tissue Embedding Center EC 350
for paraffin blocks
The Myr EC 350 is a modular paraffin embedding center featuring innovative design as well as easy operation. Multiple configurations of instrument set-up offer a simple and flexible adaptation to the working methods in the respective lab.
Dispensing console EC 350-1: easy to use operating panel
Spacious working area for fast specimen processing
|The spacious, heated working area incorporates a non-glare white LED illumination and optionally, a swiveling large field magnifier allow fast, ergonomic operation. The paraffin flow from the dispenser can be released manually as well as via footswitch, with the flow rate set continuously if required.
A cooling spot, which is integrated into the working surface, close to the paraffin nozzle offers a lean workflow with short movements, and also offers a simple and fast specimen orientation while processing. Six independently heated wells for forceps accommodate cable-free standard forceps. Optional electrically heated forceps are available.
Energy saving automatic timer operation
The automatic timer saves energy through automatic turning on and off via a calculation of the individual pre-heating times. The user only need program the desired operating times, with everything else done by the instrument itself.
In doing so, weekends and, if necessary, holydays are automatically exempt from the automatic turning on, to optimize the durability of the stored paraffin.
Spacious paraffin reservoir for continuous operation
|The paraffin reservoir has a capacity of 5 liters to guarantee continuous operation during busy periods.|
Cryo console EC 350-2
|The cryo console EC 350-2, can be placed on either the left or right side of the dispensing console, depending on the working method of the laboratory.
EC 350-2 has a large cooling surface that accommodates 80 cassettes / 60 moulds. The temperature can be set down to -12 °C and offers an even temperature distribution over the entire surface. Cold plate can operate connected to the dispensing unit or as a standalone instrument.Optional methacrylate cover to prevent the building up of frost.
Technical Data Embedding Center EC 350
Dispensing Console EC 350-1
|Dimensions (w x d x h)|
|Console||595 x 650 x 430 mm|
|Removable Trays||262 x 175 x 55 mm|
|Paraffin reservoir||5 l|
|Left/Right chamber||1,7 l|
|version 1||version 2|
|Nominal voltage||100-120 V||220-240 V|
|Networks frequency||50/60 Hz||50/60 Hz|
|Power Consumption||7,5 A||3,6 A|
(temperature increase by 1 °C)
|Paraffin reservoir, left/right chamber, heated area,
|Electrically heated forceps||60/75°C|
Cryo Console EC 350-2
|Dimensions (w x d x h)|
|Console||340 x 620 x 405 mm|
|Cold plate||375 x 307 mm|
|Capacity||up to 80 cassettes / 60 moulds|
|version 1||version 2||version 3|
|Nominal voltage||100 V||110 – 120 V||220 – 240 V|
|Networks frequency||50/60 Hz||50/60 Hz||50/60 Hz|
|Power Consumption||2,4 A||3,0 A||1,2 A|
(temperature increase by 1°C)
|Cold plate||0/-12 °C|
|Electrically heated tweezers||3 available models: 1mm – 2 mm – 4mm tip|
|Methacrylate cover for cryo console|